TITLE: 941123 INSTALLING WARP ON A SYSTEM WITH CDROM (TOSHIBA)
              CONNECTED TO AN ADAPTEC 1542C, GETTING A RED SCREEN NO
              CDROM DEVICE SUPPORT FOUND.

DESCRIPTION OF SYMPTOMS:
    Red screen on DISK #1, message no cdrom device support found.

RESOLUTION:
    Under the Adaptec setting option (Ctrl+A), disable the FAST
    SCSI and Synchronize option.
    This will enabled OS/2 WARP install DISK #1 to recognize the
    cdrom.
    Note: The system has also a SoundBlaster card, but the
    cdrom (Toshiba) is connected to the Adaptec 1542C SCSI
    controller.




