    Program: GRAF-D v2.20  Copyright (C) 1993 Clark Development Co., Inc.
     Author: Steve Catmull
       Date: 09/10/93
        Enhancement by: Don Shriver
         Date: 10/19/93

DESCRIPTION 
========================================================================

               PPE (PCBoard Programming Executable) that you can replace
               PCBTEXT record #149 with.  
             
               What this PPE offers that PCBoard does not is to do some 
               checking for graphics capability before asking the caller 
               if they want graphics or not.  
              
               The Enhancement allows you to operate GRAF-D in AUTO mode
               and still give Users the opportunity to override the 
               Automatic Graphics Detection and manually select their
               Graphics mode, if they so choose.


INSTALLATION
========================================================================
             
               Installing this PPE is very simple.  Use MKPCBTXT to load 
               your PCBTEXT file.  Press F3 and enter 149.  You will now 
               see the "Do you want graphics" record.  Simply change it 
               to an ! followed by GRAF-DE.PPE /DELAY:27 /AUTO. For 
               example, if you have your GRAF-DE.PPE stored in your 
               C:\PCB\PPE directory, your entry on PCBTEXT Record 149 would
               be    !C:\PCB\PPE\GRAF-DE.PPE /DELAY:27 /AUTO
               
               The Delay of 1 and a half seconds, gives the user the time
               to interrupt the Automatic Graphics Detection. If the User
               does not interrupt, the Automatic Graphics Detection system
               will put the User in the proper Graphics Mode. If GRAF-DE.PPE
               does NOT detect either ANSI or RIP Graphics, the "Do you
               want Graphics" prompt will appear, just in case GRAF-DE.PPE
               was unable to detect ANSI or RIP on your system. 
               
               In addition, make sure that you have not told PCBoard 
               that you want to default to graphics at login.  If you
               do, GRAF-DE will warn you that your system is improperly
               configured.
                
=========================================================================               
               


